Set of screw-tips for hooks "Cactus"

A set of nozzles "Cactus".
Article - Kaktus.

Engineering work attachment a Cactus.
Screwed the head on the screw hook along the barrel of the hook. Not strong,but methodical punches to work around the perimeter of the dent.
There is a second option— pushing. The tip is applied to the dent and the work is pushing a sharp upward motions. Control work is needed in the lamp.

If you go micro nakoly, it says excess pressure.
Micro pinhole can not be done. Nozzle Cactus relevant when dealing with hail.
In the mean time lifting technique allows to achieve high speed at work and immediately to achieve the cleanest result.
There is no need to twist the lamp. When building the geometry of the part, reduces the risk of stretching the repair parts.
To achieve the result in the technique of lifting the nozzle Cactus the desired initial operating equipment.
The main indicator of the correct development of technique - the work and the cleanliness of the result.
This technique is different from the classical scheme of lifting and, if desired, quickly mastered by the master.